Glue & one screw through the light fixture below Use a long saw, the skins are about $400. for the pair Ivan: _______________________________________________________
Water Tank Gauge: ______________________________________________________ Broken Cabinets Hinge Replacements: Ron:
______________________________________________________
Leaking Drain in a 4100 SCB: Ivan:
______________________________________________________
-----------------------------------
"A ship is safe in the harbor,
but that's not what ships are for"
-----------------------------------
Here we go.
______________________________________________________ Maxum Owners Forum
4100 SCB Dinette Seat, (should be similar in all models)
Ever wondered how that seat is held in place?
Glue & one screw through the light fixture below Use a long saw to cut through the glue, the skins are about $400. for the pair
Ivan:
____________________________ Maxum Owners Forum Water Tank Gauge:
This is in a 4600 SCB, we usually fill up while having someone watch the gauge.
We found that filling without watching the gauge, you can pin the float to the top of the tank.
The float travels between 20 and 80% of the tank.
When you overfill, you at times have to remove the float and reset it.
The tank is under the inboard bed, to the aft. Jc
______________________________________________________ Maxum Owners Forum Broken Cabinet Hinge Replacements
:
Dear Maxum Owners,
I come bearing good news and bad news. If you have suffered a broken hinge on any of your cabinetry, I must inform you that the hinge is no longer manufactured and none are available for replacement.
The good news is that the manufacturer Grass America has a lifetime warrantee on their hinges. If you are in need of replacing a broken hinge, the good news is that there is a similar characteristic hinge that will replace your broken hinge. Replacement of EURO series hinge: the new stock number for the hinge is SKU79840-01. The base plate, depending upon your cabinetry, stock number is 13158 face frame adapter with lip or 10759-01 for the standard flat base plate.
Grass America is located at 1202 Highway 66 South, Kernersville, NC, 27284. If you wish to visit their web site it is
Grass America will send you 6 new hinges and base plates at no charge if you send back to them one of your broken hinges.
Master Mariner 4100 SCA, Ron Radford
______________________________________________________ Maxum Owners Forum Leaking Drain in a 4100 SCB:
Hi Todd,
Glad you got the TV thing done…
The drain is a standard household drain you can take out and get a match at a plumbing supply store, it is held in place by the three screws you see and the bottom is attached to a hose with hose straps. Be careful not to loose the hose, it is a difficult item to retrieve since that part of the bilge is not accessible from below.
I replaced my hose by attaching a new one to the old with a short flange and straps and feeding it down to the sump pump.
Your leaking problem may be fixed by just prying it out (carefully not to break the gelcoat, you can use antibond to loosen it, and reapply a good amount of 3m sealant.
The water accumulating in the wrong spot can be corrected by better leveling the boat (moving batteries, storage items mothers in law, or fuel until it drains well.
Ivan
______________________________________________________ Maxum Owners Forum
:
______________________________________________________
For Sale:
Boats...
Yes, you can list your boat for sale on the Maxum Owners Website, if you a paid member its free.
Send me your description and particulars, photos if you have them or we can use stock photos.
Jim Clausen mailto:billegates@aol.com
_____________________________________________________
Please Take Note:
If you send me an E-mail, please put "Maxum Owners Group" in the subject bar.
Due to all of the junk mail I get, there are times when I trash mail in batches,
if I don't recognize you E-mail address I might just toss it by mistake, thanks. James
If you would like to be removed from this E-mailing list send me,
James, an E-mail @ Billegates@aol.com and request to be removed.
